Tag: flower

Rolled Flower Tutorial

1 Comment
Hi friends!
I adore using rolled flowers on layouts and Lori Whitlock has a ton of them to choose from. A lot of people are intimidated by them but they are so easy. Today I’m going to show you just how easy and stunning they are. The two I’m using are Rolled Flower 47 and Rolled Flower 39.
 
Cut your flowers. Mine are cut at about 5 1/2 x 5 1/2. If you want your edges inked, it is easier to do it now but you can do a little inking once the flower is finished also.
 
Remember if you are using 2 sided paper, the color you roll onto will be the color that shows. (the flower below is blue on the back, I want the yellow to show). Pointy tweezers are wonderful to roll these with but they are not necessary. Start rolling the outermost end. I like to roll the flowers tight so they keep their form.
 
Make sure when you roll you are keeping the bottom (the flat, inside edge) even with itself.
Top view of the start of the rolling.
Keep rolling the flower tight. It will look like the below photo.

The reason I like to roll them tight is they hold their form before being glued. Before I add the glue, I like to let them unravel. This is what I mean by they hold their form when rolled right.

Once the flower has unraveled, I add glue to the bottom circle. The best glue I have found to use is actually Glossy Accents.
I add a generous amount to the circle piece in the center of the cut and lay the base of my rolled flower over the glue.
I arrange my rolls until I like the look of it and place a heave punch on top of the flower until it dries.

When my flower had dried I like to rough the petals a little. Sometimes I will crumple the paper before I start to roll the flower to make it easier to distress the petals when the flower has dried.

I posted this layout a while back but it shows just how stunning rolled flowers look on a layout.

Close up of the flowers.

 

I also used 3D Flower on this layout

Thanks for stopping by and happy crafting!

5×7 3D Sunflower Bouquet

Leave a comment
Hello crafty friends, Noelene here today! As you can see I cannot get enough of Lori’s new Floral Bouquets. Today I am sharing a card from her latest 5×7 Easy Floral Bouquets called 3D Sunflower Bouquet (SVG), (Silhouette). The files come with a 5×7 Bouquet & a little mini card.
After cutting out all my pieces I embossed the centre of the flowers to give a little dimension. I also inked the petals in the centre, though it is hard to see in the image.
I love how practical these files are. If you didn’t have time to make the bouquet & wanted to make a quick card, you can use the mini card & enlarge it to 5×7 as I have done here.
The bouquet folds flat to fit a 5×7 envelope!
Make sure you check out the other 5×7 Bouquets here.
For more inspiration, check out my Instagram!
Thanks for stopping by!
Hugs
Noelene 🙂

Box Card Flower Trunk Tutorial

Hello crafty friends! Today I am sharing an assembly tutorial for the Box Card Flower Trunk (SVG, Silhouette).  I used papers from the Day and Life collection by Echo Park Paper Co. I also cut a few extra flowers to add to my card to give it a fuller look.

The body of the box card is in two parts that will be glued together. The tabs are all folded in a valley fold. First, I inked the edges of all of my pieces then glued the decorative panels to the outside of my trunk. I then assembled the flowers. All of the flowers have two layers. I then glued the flowers to the two inserts. Three of the flowers are on the front insert and two flowers on the back insert.

For the trunk I added glue to both tabs and made sure to line up the holes on both pieces so that the brads would be fit. I then glued the decorative corner pieces to the trunk and added the brads to all of the holes. Enamel dots would also be cute on the holes if you can’t find brads. After I had all the brads in place I glued the back decorative panel into the trunk.

Next, I folded the tabs on the inserts in a valley fold and added glue to the back of the tabs. Securing one tab at a time I lined up the edge of the tab with the top of the trunk and held it in place while the glue set. I was also careful to not glue the tab over the back of the brad. I repeat the process for the other side of the insert. With both tabs glued I fold the card flat to check that it will fold flat then repeat the process for the second insert.

With both inserts secure I glued the last flower and stem to the front of the trunk.  I then embellished my trunk with the additional flowers and two butterflies I fussy cut from the collection.

This card is so pretty and has several sentiments for the back of the card that are included in the file.

Thanks for stopping by today!
Brandie

Box Card Spring Flower Pot Tutorial

Hello crafty friends! Today I have a quick assembly tutorial for one of the new Flowerpot box cards. I used the Box Card Spring Flower Pot file (SVG, Silhouette). This file is so bright and cheerful. It has several print and cut sentiments so that it can be used for any occasion. I used the Happy Birthday sentiment, and the papers are from the Our Happy Place paper collection by Echo Park Paper Co.

The box part of this card comes in two separate sections with two decretive panels on each. These two sections are glued together side by side. It also has two rim pieces that will be glued on the front and back of the card. The rim pieces hang over the edge of the pot a little so be sure not to add glue all the way to the edge of the paper. I glued the pot all together forming the square before adding the inserts this time as well.

Before the inserts are added to the box card the flowers need to be assembled. All of the flowers have multiple layers for added dimension. The file does come with centers for the flowers, but I used enamel dots for mine. After all of the flowers are assembled I added them to the inserts. Inserts one and two are the only ones with flowers. The third insert is plain green.

The tabs on all of the inserts are folded into valley folds and glue added to the backs of the tabs. I held the tabs folded down and slid the insert into the box, made sure the top of the tabs was flush with the top of box and front of the tabs was flush with the front of the box. After I had the tabs lined up, I folded the box card flat in both directions to make sure everything would lay flat. I then added the remaining inserts the same way but using the insert in front as the guide.

With the inserts all in place I then glued the flower and sentiment to the front of the box.

I love how versatile this box card can be. I hope you give it a try. Thanks for stopping by today!
Brandie

Bee-utiful Day! Layout

Happy Monday everyone!  I have some fun layouts to share with you today featuring Lori’s Bee Happy Collection,  This collection is just pure joy as are these pictures of me and my besties visiting the Friends set in Denver a couple years ago.  We had the best time.  Oh the memories of that trip!

For the first layout I used this Shaped Bee Card in Lori’s Shop or here in the Silhouette store,  and I just used the top layer to create this little guy and I used 11 Hearts in Lori’s Shop or here in the Silhouette Store, for all the little hearts scattered and stitched on the layout.

And for this next layout with that famous door to Monica’s apartment…I used just the top layer of the Flower Shaped Mother’s Day Card in Lori’s Shop or here in the Silhouette Shop,
Flower shaped mothers day card,  I love it on this page!

 

Thanks for stopping by!
Cathy