Category: SVG files

3D Christmas Santa Bouquet Tutorial

Hello crafty friends, Noelene here today! Today I am sharing a tutorial of the 3D Christmas Santa Bouquet (SVG). 
To start cut out all your pieces. I then embossed my santa suit using a Christmas embossing folder.

 

Glue all your panels in place. I valley folded the small piece of the envelope & applied glue to the tabs. I aligned it to the bottom & sides of the larger piece. This creates the pocket.
Now to create the mechanism.
Fold the little tab then fold the mechanism in half & glue the tab down.
For the easel leg glue the single tab to the back, then wrap the rest around going to the back & bringing it to the front glueing each tab. This is to make the easel leg sturdy.

Next valley fold both ends in so that it forms an X.

Now apply glue to the mechanism making sure you do not go past the fold on the easel leg.
Now place the glued mechanism on the inside of one of the pot panels making sure to align the leg to the bottom. It should sit a few millimeters beneath the top. Now glue the top part of the mechanism only & place the other pot panel on top. Hold down for a minute or so till it dries. Now glue the tabs to the inside.

Next take the larger foliage panel with Santa & turn it over. You want to apply glue on the back of the bottom square part. Now turn it over so you can see your front panels & gently slide it in between the back of your X. The glued square should be stuck onto the back pot panel. Now with the smaller foliage panel you will apply the glue onto the front side of bottom square. This time you will slide it into your X on the front folded part of the mechanism so that the glue adheres to the front pot panel.

To make your bouquet stand on its own gently squeeze the sides of the pot & fold in the leg of your mechanism. To fold flat place it back down again.

I hope you enjoyed my tutorial today! You can also buy the 3D Christmas Bouquet Bundle here, which also features 3D Christmas Tree Bouquet, (which I created here), and 3D Christmas Reindeer Bouquet.
Use coupon code NOELENE for 10% off your purchase anytime at Lori Whitlock Shop!
For more inspiration, check out my Instagram!
Thanks for stopping by!
Hugs
Noelene 🙂

Hello Sunshine!

Happy Monday!

Sometimes the sweetest gifts are the simplest ones.  This cheerful little box of sunshine (SVG, Silhouette) is filled with bright yellow treats, refreshing drink mixes and a few happy extras to remind someone they are loved.  Whether you are celebrating a birthday, cheering up a friend, thanking a teacher or simply sending a little encouragement, this project is a fun way to spread a little sunshine.

The adorable smiling sun and sunny rays make this gift impossible not to smile at!  I used Lori’s Our Groovy Summer and with all the coordinating embellishments and it was perfect for all the finishing touches.  Fill it with all things yellow and surprise someone special.

Life is always a little brighter when you share a little sunshine!

Cathy

 

5×7 Box Card Christmas Shops

I’m on the Lori Whitlock Blog today with a few easy tips for  making these new release festive  5×7 Box Card Christmas Shops. 

 

5×7 Box Card Christmas Book Shop
5×7 Box Card Christmas Cafe Shop
5×7 Box Card Christmas Tree Shop
5×7 Box Card Christmas Bakery Shop
 
Today I am going to show you a few tips for making these fun Christmas Shop Cards from Lori’s  latest release.
 
The main ‘building’ pieces are all the same for each shop and the decor changes for each house. As always, I cut extra’s of all the small  pieces because I always lose something! Does that happen to you?
 
 
Glue all your pieces on the front of your shop
This is the insert for inside the box card.  Notice the window is added on the side with the short tab. Add glue on the short sided tab.
Turn over both decorated house pieces. Take the insert and glue the short tab right up to the fold of the tall house (back of the house that has the white piece glued to it).
Here you can see how it looks after it is glued.
After your first  tab is dry, fold over the insert with the tiny window and add glue the long tab on the right side. Flatten the insert and fold over the right side piece. (Always make sure the bottom of the pieces line up evenly). See below
Hold the right side piece down to make sure the glue is dry on the underneath tab. Fold over the left side house piece and it will line up perfectly with the glued tab. Pretty slick that Lori’s files are so well designed that everything just fits!

I would add pressure on the right side where the tabs are to make sure the tabs are really stuck. Flip the card back and forth to make sure it folds flat so it slips into the envelope easily. These cards fit  nicely in a 5×7 envelope.

 
Added tip  for the awning—glue on you second color tab and then flip it over.
The awning is designed to glue on flat but I wanted to have it pop out a bit on the bottom like a real awning. Add glue to the top of the piece and a foam strip  on the bottom.  When you glue it on, it looks so darned cute! 
 
I hope you will give these cards a try, they are  striking made up as a little village.
 

Box Card Spring Flower Pot Tutorial

Hello! Today, I’m excited to share a step-by-step assembly tutorial for the Box Card Spring Flower Pot 3 (SVG, Silhouette). This card includes several print-and-cut sentiments, and for this project, I’ve chosen the Happy Birthday design. All of the papers come from the Strawberry Fields collection by Echo Park Paper Co.
First, I inked the edges of most of the paper pieces and folded all of the score lines into valley folds. Next, I adhered the gingham patterned paper to the flowerpot base, which is constructed from two pieces glued end to end. The three inserts feature a total of 10 flowers, with one additional flower attached to the front of the pot. Although the file includes flower centers, I chose not to cut them from paper. Instead, I used enamel dots from my stash for the flower centers.
The inserts can be a little tricky to attach because of the flowerpot’s slanted shape. I adhered them to the inside of the second and fourth sections, starting with the left tab of each insert. As I attached them, I made sure they were level with the top edge of the flowerpot and aligned with the front insert.

Once all the inserts were secured on the left side, I folded them over and applied glue to the back of each tab. Then, I folded the flowerpot over the glued tabs and added glue to the flowerpot tab before closing it. I also added two strips of gingham paper to form the flowerpot’s rim, adhering them neatly to both the front and back of the card.

Lastly, I adhered the sentiment and the final flower to the front of the flowerpot.

I hope you enjoyed this tutorial, and if you have any questions, feel free to reach out. Thank you for stopping by today!
Brandie

Nugget Box Tutorial

My cute little neighbor kids always get a little holiday treat from me and so when I saw these nugget boxes (found HERE) I knew thats what they were getting. I did alter my box some so you can see my wrapped nuggets. I cut the wrap/outside of the nugget box in acetate.

First, cut your pieces and get your nuggets.

Fold on the score lines. Below will show you where to add your adhesive. I like Scor-tape for a secure hold. When assembling the box make sure you adhere the tabs inside before folding the edges over or else your tabs will show.

After gluing your tabs, fold the edges over and glue them in place. Below is what your completed nuggest box will look like.

The wrap for the nuggets isn’t on the file but those just need to be cut 1 inch x 3 inches. Add tape to both sides on the same end of the paper and attach it to the nuggest.

The acetate in the following photos is hard to see but essentially just cut the slide part of the file and fold on the score lines. Adhere with strong adhesive on the tab to complete the box.

Slide your nugget box into the acetate sleeve. I added some twine around the box for a little extra love.

I wrapped my nuggets to resemble a flag using paper from Lori’s Echo Park Have A Holly Jolly Christmas and paper by Fancy Pants called Hometown Summer.

 

Thanks for stopping by and happy crafting.